• Description
  • Technical Data
  • Documentation
  • Programs
  • Available accessories

The QUANCOM® ETHOPTO64IN Board has 64 opto inputs and is designed for industrial purposes.

Optocouplers protecting the inputs up to 500 Volts

Your personal computer is protected against damage in case of overvoltage by galvanic isolation. These optocouplers are designed as alternating current optocouplers which means that you can choose the polarity of input signals optionally . You can also accommodate the input voltage range individually. If you want to have an input range from 5V to 12V feel free to tell us in your order. The default input range is 12V to 30V.

Input edge detection

The 64 inputs are equiped with input flipflops which detect quick input state changes or remove switch bounce. This allows the detection of fast input changes.

Software library

USBOPTO64INVB example
VB USBOPTOREL32 example
ZoomThe ETHOPTO64IN example shows the programming with Visual Basic
You don't need any knowledge in driver development. We implemented a command set which is usable for all operating systems. An application that controls the ETHOPTO64IN, and which is generated for Windows 98 can be used directly on a Windows XP PC.

With QLIB it is easy to create applications with Visual-Studio .NET, Visual-Basic, Borland Delphi or other modern compilers. Even an interface to MS Excel, MS Access or Sun Java is available. We included the VB USBOPTO64IN example which shows how to program and test the card. It also includes the source code which is a good starting point for your own applications.

The ETHOPTO64IN is also available as ETHOPTO64OUT and ETHREL64 .



•General I/O
Dimensions: 254*105*57 mm
Power Supply: 12V-24V external

•Inputs
Quantity: 64 galvanically isoltated Optocouppler Inputs
Input Current: max. 20mA
Input Voltage: 12V-30V opt. 5V-12V

•Bus
Ethernet

•Temperature Range
0...50 °C



Manual for the USB Flasher
PDF manual for the Firmware Update Programm
[Download 281.7KB]


Manual for Ethernet and RS232 Extension Modules
This is the PDF manual for the USBADPRS232 ( RS232 Extension Module ) and the USBADPETH ( Ethernet Extension Module ).
[Download 1941.9KB]


Manual for USB, ETH and SER Optocoupler and Relay Modules
This is the manual for our optocoupler and relay modules.
[Download 1898.8KB]


Manual for the Serial and Ethernet Communication Protocol
This is the PDF manual for the serial communcation protocol which may be used to communicate with our ETHxx or SERxx modules without using the QLIB or driver.
[Download 203.2KB]



QCLI (QUANCOM Command Line Interface)
The QUANCOM Command Line Interface (QCLI) was made for all those which don´t have programming experience or knowledge.

It is a simple command line tool which makes it able to control our I/O and Watchdog boards with some very simple strings.

Note that this procedure is not as fast as a programm written in a higher programmiung language, for example C.
[Download 56KB]


Command Line Tool to Change Module Address
This command line tool makes it possible to change the address of your module by software.

Note that therefore the installed Firmware has to be higher or equal to Version 1.30 and the switch in the QLIB Configuration Utility must be set correctly.
[Download 35.4KB]


Firmware Version 1.56
Current firmware for QUANCOM USB-, ETH- & SER modules

 USB Flasher Guide

Caution: This firmware is not to be used with the following modules
  • USBGPIB1
  • USBCOUNTER1
  • USBCPU1
  • USBREL8UM
  • USBREL8 & /LC
  • USBOPTO8 & /LC
[Download 27.6KB]


QCLI (QUANCOM Command Line Interface)
Das Quancom Command Line Interface (QCLI) ist für diejenigen gedacht, die sich in der Programmierwelt nicht zurechtfinden, oder auch keine Lust haben sich ein eigenes Programm für den Zugriff auf unsere QUANCOM Karten zu schreiben. Da das QCLI recht simpel gehalten ist, ist es um ein wesentliches langsamer, verglichen zu einem gut programmierten Programm. Mit einfachen Funktionen der QAPI lassen sich über das QCLI QUANCOM Karten und Module bedienen und konfigurieren. [Download 32.1KB]


Firmware Version 1.34
Firmware for QUANCOM USB-, ETH- & SER modules

 USB Flasher Guide

Caution: This firmware is not to be used with the following modules
  • USBGPIB1
  • USBCOUNTER1
  • USBCPU1
  • USBREL8UM
  • USBREL8 & /LC
  • USBOPTO8 & /LC
[Download 20.7KB]


QCLI QUANCOM Command Line Interface
( Windows Executable )

QUANCOM QCLI provides the user with a simple to use command line tool to control QUANCOM hardware.

[ Further Information to QCLI ]

[ Online-Documentation to QCLI ]

[Download 56KB]



Hutschiene
Top-Hat Rail


NT12V/3A
Compact power supply


NT12V/3A
Compact power supply


NT24V/2A
Compact power supply


STNETZT1A
Compact power supply


SEN-DREH1
Revolution sensor


SEN-OBJ1
Object sensor


  Add to cart
Price
693.68 Euro
(incl. Taxes)

Operating Systems
Windows 10/8/7 (32/64)
Windows Vista (32/64)
Windows XP (32/64)
Windows 2000
Win Server 2008/2012 (32/64)
Win 2003 Server (32/64)
Win 2000 Server
Windows 95/98/Me
Linux
Similar Products
 
ETHOPTO32IO

Ethernet Interface
32 Optocoupler Inputs
32 Optocoupler Outputs
 
USBOPTO16IO

16 Optocoupler Inputs
16 Optocoupler Outputs
Tough Metal Case
 
USBOPTO32IO

32 Optocoupler Inputs
32 Optocoupler Outputs
Tough Metal Case





... back to home




Updated on 13.6.2015 by Michael Reimer