|
GPIB-1 - IEEE-488.2 Card with NEC 7210 compatible controller
- QUANCOM ISA GPIB Card
- This board is also available as PCI GPIB Card and USB GPIB Controller
- Standard IEEE-488.2 board with NEC 7210 chip
- Controller for 15 GPIB devices
- The driver software allows the operation of up to 8 GPIB cards in one PC
- Drivers for MSDOS, Windows 3.x / 95 / 98 / ME / NT / 2000 / XP included
- Compatible with standard applications
- Sample Programs for Microsoft Visual-Studio .NET, VB, Visual-C/C++, Borland C/C++, Delphi, LabView, LabWindows/CVI, Sun Java and others
- Download source and driver for Linux here: GPIB Project - Free University Berlin
- Terminal Program, Visual-Basic Test Application with Source
- GPIB Cable
- 5 years warranty
|
|
Sorry, but this product is no longer available. You still can get updated manuals and drivers from this website and can contact us if you have any problems with your product.
Alternatives or successors:
- PCIGPIB-1
QUANCOM®
PCI
GPIB
Card
with
i-72010
- USB-GPIB-1
QUANCOM®
USB
GPIB
/
IEEE-488.2
Interface
| |
The QUANCOM GPIB card is used to connect devices with the wide-spread IEEE-488.2 interface to the PC. The interrupts 2,3,4,5,6,7 and DMA 1,2,3 are available. This gpib board has been sold more than 1000 times and it is the standard and cost effective solution for measurement with the IEEE-488 devices. This GPIB board uses the Standard NEC 7210 register settings and is therefore compatible with all significant applications and operating systems.
Therefore internet downloadable programs or source code, for example, can be used. The card can be connected to the PC with up to 15 peripheral devices having IEEE488 interfaces. All settings are adjusted by means of jumpers. The data exchange is controlled by an intellegent uPD7210 controller from NEC. Therefore, the card's function is compatible with almost all IEEE driver programs.
The board is supported by the QLIB ( QUANCOM Driver Library ) and therefore programmable with most modern compilers and interpreters.
You need no knowledge in the driver development.
 | | |  This project shows how to program the card in Microsoft Visual-Basic |
| |
We implemented an command set which is the same for all operating systems. An application that uses our GPIB Card, which is generated for Windows 98 can be used directly on a Windows XP PC.
With the QLIB it is easy to create applications with Visual-Basic, Visual-C/C++, Borland Delphi, LabWindows/CVI or other modern compilers. Even an interface to MS Excel, MS Access, HP VEE ( 3.1, 4.0 and 5.0 ) and even NI LabVIEW 4.0 thru LabVIEW 6.i is available. We included the VB GPIB Sample which shows how to program and test the card and it also includes the source code. This is a good starting point for your own applications.
The QLIB is a API which provides it's functions through a Windows DLL, so it is possible to use QLIB with all applications that allow access to external DLL Functions.
The following functions are available for the control of GPIB devices:
• Reading devices • Writing devices • Reading the status of the SRQ line ( The SRQ line is used by HPIB devices to interrupt the Active Controller, which then performs a Serial Poll or Parallel Poll to determine which device requested service, and why. The poll clears the SRQ. ) • Controlling Remote / Local Mode • Polling the status byte ( In a serial poll, the Active Controller asks each device in turn to send back a status byte that indicates whether the device has asserted the SRQ. ) • Supported commands ( GTL = Goto Local, SDC = Selected Device Clear, GET = Group Execute Trigger, LLO = Local Lockout, DCL = Device Clear, Serial Poll Enable, Serial Poll Disable, UNL = Unlisten, UNT = Untalk )
For a fast and easy implementation under DOS, a Terminal-Program and a Device-Driver for plotter- and measuring device control are included in the scope of supply.
Download source and driver for Linux here: GPIB Project - Free University Berlin
GPIB Cable
|
Samples/Sources and QLIB commands
|
|
Sample Source for Borland Delphi
This sample shows how to program the GPIB Controller Board. It includes the following functions: Sending string, receiving string, send commands, serial poll devices and reading the state of the SRQ line. [View Source]
|  |
|
Sample Source for Visual-C/C++
This sample shows how to program the GPIB Controller Board. It includes the following functions: Sending string, receiving string, send commands, serial poll devices and reading the state of the SRQ line. [View Source]
| |
|
Sample Source for National Instruments LabWindows/CVI
This sample shows how to program the GPIB Controller Board. It includes the following functions: Sending string, receiving string, send commands, serial poll devices and reading the state of the SRQ line. [View Source]
| |
|
Sample Source for Visual-Basic
This sample shows how to program the GPIB Controller Board. It includes the following functions: Sending string, receiving string, send commands, serial poll devices and reading the state of the SRQ line. [View Source]
| |
|
Sample Source for Lotus Notes
This sample shows how to program the GPIB Controller Board under Lotus Notes. It includes the following functions: Sending string, receiving string, send commands, serial poll devices and reading the state of the SRQ line. [View Source]
|
Included drivers
|
  
|
QLIB 2.4.165 QLIB for Windows Vista/XP/2000
Supports Windows Vista
Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ).
This version does not support the following products: PAR8R;PAR8O;PAR48IO;PAR12AD;PAR16AD;PAR2DA and PCI-EXT64 [Download 6,9MB]
| |
|
QLIB 1.9.8s QLIB for Windows XP/2000/NT4.0/ME/98/95
Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ). [Download 69,5MB]
| |
|
QLIB Samples 2.4.165 QLIB Samples for Windows Vista/XP/2000
Installation package for QLIB sample projects.
This package contains sample projects and programs for the following IDEs and graphical programming systems.
IDEs
- Visual-Studio VB .NET
- Visual-Studio C# .NET
- Visual C++
- Visual Basic
- Borland C++ Builder
- Borland Delphi
- Sun Java
Graphical Programming
Additionally there are samples included which show how to communicate using QUANCOM modules with MS Office products.
Office Products
[Download 80,3MB]
| |
|
QLIB Remote Server 1.2 QLIB Remote Server 1.2 for Windows XP / 2000 / NT 4.0 / ME / 98 / 95
The QLIB remote server offers the possibility to manage QUANCOM hardware over TCP/IP connections. [Download 3,7MB]
|
Included Programs
|
|
Borland Delphi Sample for the ISA GPIB-1, USB GPIB and the PCI GPIB Cards
Borland Delphi Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 32,1KB]
| |
|
LabWindows/CVI Sample for the ISA GPIB-1, USB GPIB and the PCI GPIB Cards
LabWindows Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 19,3KB]
| |
|
Visual-Basic Sample for the ISA GPIB-1, USB GPIB and the PCI GPIB Cards
Visual Basic 6.0 Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 16,5KB]
| |
|
Visual C/C++ Sample for the ISA GPIB-1, USB GPIB and the PCI GPIB Cards
Visual C/C++ 6.0 Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 44KB]
| |
|
LabView 6.0 Sample
Contains sample project which explains how to send and receive data with the QUANCOM GPIB Controller in National Instruments LabView. [Download 27,8KB]
| |
|
Visual C# .NET Sample
Visual C# .NET Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 20,3KB]
| |
|
Visual Basic .NET GPIB Sample
Visual Basic .NET Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 16,7KB]
|
Available accessories
|
•GPIB-K2
|
GPIB cable, IEEE-488-cable
| |
... back to home
Updated on 24.10.2006 by Jürgen Siebert
|
|
|
|